Fix Epson TX219 Service Required – Waste Counter Reset

Epson TX219 Waste Ink Counter Reset

If your Epson TX219 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX219 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson TX219 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson TX219 waste counter reset in minutes.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson TX219 Waste Counter Reset

  1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson TX219 via USB (Wi-Fi reset is not supported).
  2. Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson TX219.
  3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson TX219 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson TX219 waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

Common Fixes

  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).
  • Close Epson Status Monitor or other printer utilities.
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson TX219 – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv