How to Reset Epson PX660 Waste Ink Counter

Epson PX660 Waste Ink Counter Reset

If your Epson PX660 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson PX660 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson PX660 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson PX660 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson PX660 Waste Counter Reset

  1. Trin 1: Connect Epson PX660 to a Windows computer with a stable Internet connection using a USB cable.
  2. Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson PX660.
  3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson PX660 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson PX660 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson PX660 – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv