Model-specific reset guide

Epson L3168 Reset Waste Ink Counter

When Epson L3168 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Nulstillingsnøgle$8,00
Instant email deliveryTeknisk support er inkluderetReplacement key after a failed reset
The problem

Why the ink pad counter blocks Epson L3168

An ink pad message is a maintenance safeguard. It indicates that Epson L3168 has reached a stored waste ink value that must be reset before normal printing can resume.

Wic Reset Connect is designed to reset the compatible counter in Epson L3168. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
NulstillingsnøgleFor this operation
Step by step

Reset the counter in Epson L3168

The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.

  1. Install the original driver

    Install the official Epson driver for L3168 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L3168 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3168.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: A successful reset is finalized by switching Epson L3168 off and on. The printer should then accept jobs normally.
If Epson L3168 is not detected
  • Try another USB port and a known data-capable USB cable if the printer is not detected.
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
  • Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.

Open full instructions

Common questions

Epson L3168 reset FAQ

What if the first reset attempt fails?

Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.

Does Epson L3168 need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

Can I reset Epson L3168 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

Reset with confidence

Restore Epson L3168

Prepare Epson L3168, purchase a reset key and return to printing without an unnecessary service visit.

Reset key: $8,00
Indkøbskurv
Vælg din valuta