Epson L3104 Waste Ink Counter Reset

The Epson L3104 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3104 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L3104 Stops Printing (Waste Counter Limit)

Med Wic Reset Connect, you can reset the Epson L3104 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typiske tegn

• ‘Service påkrævet’/meddelelse om levetid i driver eller hjælpeprogram
• Vedligeholdelses-/supportkode (varierer efter model/driver)
• Udskrivning stopper efter rengøringscyklusser
• Advarslen gentages efter genstart af printeren

Epson L3104 Ink Pad Counter Reset – Quick Steps

1. Trin 1: Prepare a Windows PC + USB cable and connect Epson L3104 directly. Keep Internet enabled for validation.
2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3104 appears in the device list.
3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson L3104 to finalize.

Most Epson L3104 waste counter resets finish in ~1–2 minutes.

Hvad du har brug for

• USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)
• Windows 7/8/10/11 PC
• Stabil internetforbindelse under nulstilling
• Gyldig Wic-nulstilling Tilslut nulstillingsnøgle

Hvis printeren ikke registreres

• Brug en direkte USB-forbindelse (undgå hubs).
• Prøv et andet USB-kabel (nogle kabler er kun til opladning).
• Kør appen som administrator.
• Luk Epson Status Monitor eller andre printerværktøjer.
• Deaktiver midlertidigt VPN/proxy, hvis valideringen mislykkes.

Ofte stillede spørgsmål