Epson K105 Waste Ink Counter Reset
The Epson K105 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
A waste ink counter in the Epson K105 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Why Does the Epson K105 Show ‘Service Required’?
A service visit is often unnecessary. Wic Reset Connect allows a safe Epson K105 waste counter reset in minutes.
Common Symptoms
- ‘Service Required’ / service life message in driver or utility
- Maintenance/support code (varies by model/driver)
- Printing stops after cleaning cycles
- Warning repeats after restarting the printer
Step-by-Step: Epson K105 Waste Counter Reset
- Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson K105 via USB (Wi-Fi reset is not supported).
- Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson K105.
- Trin 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson K105.
Most Epson K105 waste counter resets finish in ~1–2 minutes.
Before You Begin
- USB connection required (Wi-Fi reset not supported)
- Stable Internet connection during reset
- Valid Wic Reset Connect reset key
- Windows 7/8/10/11 PC
Troubleshooting
- Use a direct USB connection (avoid hubs).
- Restart printer and PC, then try again.
- Try another USB cable (some cables are charge-only).
- Temporarily disable VPN/proxy if validation fails.
- Run the app as Administrator.
FAQ
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Guide prepared for Epson K105 – Waste Ink Counter Reset using Wic Reset Connect.