How to Reset Epson EP-776A Waste Ink Counter

Epson EP-776A Waste Ink Counter Reset

When the Epson EP-776A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-776A uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson EP-776A Waste Ink Counter

Most Epson EP-776A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson EP-776A Waste Ink Counter in 3 Steps

  1. Trin 1: Prepare a Windows PC + USB cable and connect Epson EP-776A directly. Keep Internet enabled for validation.
  2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-776A appears in the device list.
  3. Trin 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-776A.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson EP-776A waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson EP-776A – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv