Model-specific reset guide
Canon MG7752 Ink Absorber Full Reset
When Canon MG7752 reports that the ink absorber is full, turning it off and on will not normally remove the lock. The printer must be prepared correctly and its counter reset.
What stops Canon MG7752 from printing
The absorber pads collect ink generated during print-head cleaning. Canon MG7752 tracks those maintenance cycles in memory rather than measuring the pads directly.
Wic Reset Connect is designed to reset the compatible counter in Canon MG7752. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MG7752
- Turn the printer off.
- Tryk og hold nede Stop/Reset.
- Mens du holder Stop/Reset, skal du trykke og holde Kraft.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 6 gange.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MG7752
Prepare Canon MG7752 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MG7752 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MG7752 is not detected
- Connect Canon MG7752 directly to the computer and try another data-capable USB cable or port.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
Canon MG7752 reset FAQ
Hvor mange gange skal jeg trykke på Stop/Reset?
For Canon MG7752, use 6 Stop/Reset presses in the sequence shown on this page.
Does Canon MG7752 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon MG7752
Follow the verified steps for Canon MG7752, then restart the printer and return to normal operation.