Epson XP-103 Waste Ink Counter Reset

When the Epson XP-103 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-103 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson XP-103 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson XP-103 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Reset Epson XP-103 Waste Ink Counter in 3 Steps

1. Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-103 via USB (Wi-Fi reset is not supported).
2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson XP-103 is detected.
3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-103.

Most Epson XP-103 waste counter resets finish in ~1–2 minutes.

What You Need

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

• Restart printer and PC, then try again.
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.
• Temporarily disable VPN/proxy if validation fails.