Epson WF-2511 Waste Ink Counter Reset

When the Epson WF-2511 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson WF-2511 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson WF-2511 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson WF-2511 waste counter reset in minutes.

Step-by-Step: Epson WF-2511 Waste Counter Reset

1. Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2511 via USB (Wi-Fi reset is not supported).
2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson WF-2511 appears in the device list.
3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson WF-2511.

Most Epson WF-2511 waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC

If the Printer Is Not Detected

• Close Epson Status Monitor or other printer utilities.
• Restart printer and PC, then try again.
• Run the app as Administrator.
• Temporarily disable VPN/proxy if validation fails.
• Use a direct USB connection (avoid hubs).