How to Reset Epson PX700W Waste Ink Counter

Epson PX700W Waste Ink Counter Reset

The Epson PX700W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson PX700W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson PX700W Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson PX700W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson PX700W Printing

  1. Krok 1: Connect Epson PX700W to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson PX700W is detected.
  3. Krok 3: Use the key to reset the counter, wait for completion, then restart Epson PX700W to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson PX700W waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson PX700W – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík