How to Reset Epson NX205 Waste Ink Counter

Epson NX205 Waste Ink Counter Reset

When the Epson NX205 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX205 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson NX205 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson NX205 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson NX205 Waste Counter Reset

  1. Krok 1: Connect Epson NX205 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Run Wic Reset Connect as Administrator and confirm Epson NX205 is detected.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX205.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson NX205 waste counter resets finish in ~1–2 minutes.

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson NX205 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík