Epson L356 Waste Ink Counter Reset

Epson L356 Waste Ink Counter Reset

If your Epson L356 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson L356 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson L356 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson L356 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson L356 Waste Ink Counter in 3 Steps

  1. Krok 1: Prepare a Windows PC + USB cable and connect Epson L356 directly. Keep Internet enabled for validation.
  2. Krok 2: Start Wic Reset Connect in Administrator mode and wait until Epson L356 appears in the device list.
  3. Krok 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L356.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson L356 waste counter resets finish in ~1–2 minutes.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L356 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík