Epson ET-2715 Ink Pad Counter Reset Guide

Epson ET-2715 Waste Ink Counter Reset

If your Epson ET-2715 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson ET-2715 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson ET-2715 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson ET-2715 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson ET-2715 Waste Ink Counter in 3 Steps

  1. Krok 1: Connect Epson ET-2715 to a Windows computer with a stable Internet connection using a USB cable.
  2. Krok 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2715.
  3. Krok 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2715.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrukce

Most Epson ET-2715 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ET-2715 – Waste Ink Counter Reset using Wic Reset Connect.

Nákupní vozík