Fix Epson XP-343 Service Required – Waste Counter Reset

Epson XP-343 Waste Ink Counter Reset

When the Epson XP-343 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson XP-343 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson XP-343 Waste Ink Counter

Most Epson XP-343 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson XP-343 Ink Pad Counter Reset – Quick Steps

  1. Стъпка 1: Connect Epson XP-343 to a Windows computer with a stable Internet connection using a USB cable.
  2. Стъпка 2: Run Wic Reset Connect as Administrator and confirm Epson XP-343 is detected.
  3. Стъпка 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-343.
Buy Reset Key ⬇️ Download Wic Reset Connect Инструкции

Most Epson XP-343 waste counter resets finish in ~1–2 minutes.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-343 – Waste Ink Counter Reset using Wic Reset Connect.

Пазарска количка