Epson ET-2811 Waste Ink Counter Reset

Epson ET-2811 Waste Ink Counter Reset

When the Epson ET-2811 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson ET-2811 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson ET-2811 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson ET-2811 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson ET-2811 Waste Ink Counter in 3 Steps

  1. Стъпка 1: Connect Epson ET-2811 to a Windows computer with a stable Internet connection using a USB cable.
  2. Стъпка 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2811 appears in the device list.
  3. Стъпка 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2811 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Инструкции

Most Epson ET-2811 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson ET-2811 – Waste Ink Counter Reset using Wic Reset Connect.

Пазарска количка