Epson EP-905F Waste Ink Counter Reset

Epson EP-905F Waste Ink Counter Reset

If your Epson EP-905F suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson EP-905F tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson EP-905F Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson EP-905F waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson EP-905F Waste Ink Counter in 3 Steps

  1. Стъпка 1: Connect Epson EP-905F to a Windows computer with a stable Internet connection using a USB cable.
  2. Стъпка 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-905F appears in the device list.
  3. Стъпка 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson EP-905F.
Buy Reset Key ⬇️ Download Wic Reset Connect Инструкции

Most Epson EP-905F waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson EP-905F – Waste Ink Counter Reset using Wic Reset Connect.

Пазарска количка