How to Reset Epson L310 Waste Ink Counter

Epson L310 Waste Ink Counter Reset

If your Epson L310 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson L310 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L310 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson L310 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson L310 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson L310 directly. Keep Internet enabled for validation.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson L310 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L310.
Buy Reset Key ⬇️ Download Wic Reset Connect التعليمات

Most Epson L310 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L310 – Waste Ink Counter Reset using Wic Reset Connect.

عربة التسوق