Epson XP-2201 Waste Ink Counter Reset

Epson XP-2201 Waste Ink Counter Reset

If your Epson XP-2201 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-2201 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson XP-2201 Stops Printing (Waste Counter Limit)

Most Epson XP-2201 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson XP-2201 Printing

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson XP-2201 directly. Keep Internet enabled for validation.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-2201.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson XP-2201 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-2201 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-2201 – Waste Ink Counter Reset using Wic Reset Connect.

Giỏ hàng