Epson L3215 Ink Pad Counter Reset Guide

Epson L3215 Waste Ink Counter Reset

The Epson L3215 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson L3215 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L3215 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson L3215 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson L3215 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3215 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L3215.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L3215.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson L3215 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L3215 – Waste Ink Counter Reset using Wic Reset Connect.

Giỏ hàng