Epson ET-2500 Ink Pad Counter Reset Guide

Epson ET-2500 Waste Ink Counter Reset

When the Epson ET-2500 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson ET-2500 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson ET-2500 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2500 waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson ET-2500 Waste Ink Counter in 3 Steps

  1. Step 1: Connect Epson ET-2500 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2500.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2500.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ET-2500 waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ET-2500 – Waste Ink Counter Reset using Wic Reset Connect.

Giỏ hàng