How to Reset Epson Artisan 725 Waste Ink Counter

Epson Artisan 725 Waste Ink Counter Reset

The Epson Artisan 725 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson Artisan 725 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson Artisan 725 Waste Ink Counter

Most Epson Artisan 725 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson Artisan 725 Waste Counter Reset

  1. Step 1: Connect Epson Artisan 725 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson Artisan 725 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson Artisan 725.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson Artisan 725 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson Artisan 725 – Waste Ink Counter Reset using Wic Reset Connect.

Giỏ hàng