Fix Epson PX-504A Service Required – Waste Counter Reset

Epson PX-504A Waste Ink Counter Reset

The Epson PX-504A delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson PX-504A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson PX-504A Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson PX-504A waste counter reset in minutes.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson PX-504A Ink Pad Counter Reset – Quick Steps

  1. Adım 1: Use a Windows PC (7–11) with Internet access. Connect Epson PX-504A via USB (Wi-Fi reset is not supported).
  2. Adım 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson PX-504A.
  3. Adım 3: Paste the reset key, click Reset, and after completion power-cycle Epson PX-504A.
Buy Reset Key ⬇️ Download Wic Reset Connect Talimatlar

Most Epson PX-504A waste counter resets finish in ~1–2 minutes.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson PX-504A – Waste Ink Counter Reset using Wic Reset Connect.

Alışveriş Sepeti