How to Reset Epson L801 Waste Ink Counter

Epson L801 Waste Ink Counter Reset

The Epson L801 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L801 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson L801 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson L801 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson L801 Printing

  1. Adım 1: Connect Epson L801 to a Windows computer with a stable Internet connection using a USB cable.
  2. Adım 2: Run Wic Reset Connect as Administrator and confirm Epson L801 is detected.
  3. Adım 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L801.
Buy Reset Key ⬇️ Download Wic Reset Connect Talimatlar

Most Epson L801 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson L801 – Waste Ink Counter Reset using Wic Reset Connect.

Alışveriş Sepeti