Fix Epson L4160 Service Required – Waste Counter Reset

Epson L4160 Waste Ink Counter Reset

When the Epson L4160 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson L4160 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson L4160 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson L4160 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson L4160 Waste Ink Counter in 3 Steps

  1. Adım 1: Use a Windows PC (7–11) with Internet access. Connect Epson L4160 via USB (Wi-Fi reset is not supported).
  2. Adım 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L4160.
  3. Adım 3: Use the key to reset the counter, wait for completion, then restart Epson L4160 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Talimatlar

Most Epson L4160 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L4160 – Waste Ink Counter Reset using Wic Reset Connect.

Alışveriş Sepeti