Reset Epson ET-2812 Waste Ink Counter in Minutes

Epson ET-2812 Waste Ink Counter Reset

The Epson ET-2812 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson ET-2812 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson ET-2812 Ink Pad Counter Warning?

Most Epson ET-2812 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Three Steps to Restore Epson ET-2812 Printing

  1. Adım 1: Prepare a Windows PC + USB cable and connect Epson ET-2812 directly. Keep Internet enabled for validation.
  2. Adım 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2812 appears in the device list.
  3. Adım 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-2812.
Buy Reset Key ⬇️ Download Wic Reset Connect Talimatlar

Most Epson ET-2812 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Use a direct USB connection (avoid hubs).
  • Try another USB cable (some cables are charge-only).
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ET-2812 – Waste Ink Counter Reset using Wic Reset Connect.

Alışveriş Sepeti