How to Reset Epson ET-2801 Waste Ink Counter

Epson ET-2801 Waste Ink Counter Reset

The Epson ET-2801 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2801 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-2801 Waste Ink Counter

Most Epson ET-2801 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Epson ET-2801 Ink Pad Counter Reset – Quick Steps

Adım 1: Connect Epson ET-2801 to a Windows computer with a stable Internet connection using a USB cable.
Adım 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2801 appears in the device list.
Adım 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2801 to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect Talimatlar

Most Epson ET-2801 waste counter resets finish in ~1–2 minutes.

Troubleshooting

Restart printer and PC, then try again.
Try another USB cable (some cables are charge-only).
Temporarily disable VPN/proxy if validation fails.
Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.

FAQ

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ET-2801 – Waste Ink Counter Reset using Wic Reset Connect.