Epson ET-2701 Waste Ink Counter Reset

When the Epson ET-2701 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson ET-2701 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson ET-2701 Stops Printing (Waste Counter Limit)

Most Epson ET-2701 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Epson ET-2701 Ink Pad Counter Reset – Quick Steps

Adım 1: Connect Epson ET-2701 to a Windows computer with a stable Internet connection using a USB cable.
Adım 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2701.
Adım 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-2701.

Buy Reset Key ⬇️ Download Wic Reset Connect Talimatlar

Most Epson ET-2701 waste counter resets finish in ~1–2 minutes.

Before You Begin

Valid Wic Reset Connect reset key
Stable Internet connection during reset
Windows 7/8/10/11 PC
USB connection required (Wi-Fi reset not supported)

FAQ

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson ET-2701 – Waste Ink Counter Reset using Wic Reset Connect.