How to Reset Epson XP-211 Waste Ink Counter

Epson XP-211 Waste Ink Counter Reset

The Epson XP-211 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-211 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson XP-211 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson XP-211 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson XP-211 Waste Ink Counter in 3 Steps

  1. Step 1: Connect Epson XP-211 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-211.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-211.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-211 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson XP-211 – Waste Ink Counter Reset using Wic Reset Connect.

Корпа