Epson PX830FWD Waste Ink Counter Reset

When the Epson PX830FWD reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson PX830FWD accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson PX830FWD Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson PX830FWD waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson PX830FWD Waste Counter Reset

1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson PX830FWD via USB (Wi-Fi reset is not supported).
2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson PX830FWD appears in the device list.
3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson PX830FWD.

Most Epson PX830FWD waste counter resets finish in ~1–2 minutes.

What You Need

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)