Epson L5316 Waste Ink Counter Reset

When the Epson L5316 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson L5316 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson L5316 Stops Printing (Waste Counter Limit)

Most Epson L5316 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Step-by-Step: Epson L5316 Waste Counter Reset

1. Step 1: Prepare a Windows PC + USB cable and connect Epson L5316 directly. Keep Internet enabled for validation.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L5316.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L5316.

Most Epson L5316 waste counter resets finish in ~1–2 minutes.

What You Need

• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC

Troubleshooting

• Restart printer and PC, then try again.
• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).
• Temporarily disable VPN/proxy if validation fails.
• Use a direct USB connection (avoid hubs).

Frequently Asked Questions