Epson ET-2818 Waste Ink Counter Reset

The Epson ET-2818 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2818 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ET-2818 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson ET-2818 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Reset Epson ET-2818 Waste Ink Counter in 3 Steps

1. Step 1: Connect Epson ET-2818 to a Windows computer with a stable Internet connection using a USB cable.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2818.
3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2818 to finalize.

Most Epson ET-2818 waste counter resets finish in ~1–2 minutes.

Troubleshooting

• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.

Frequently Asked Questions