Epson ET-1815 Ink Pad Counter Reset Guide

Epson ET-1815 Waste Ink Counter Reset

The Epson ET-1815 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-1815 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson ET-1815 Ink Pad Counter Warning?

Most Epson ET-1815 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson ET-1815 Waste Ink Counter in 3 Steps

  1. Step 1: Connect Epson ET-1815 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson ET-1815 is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson ET-1815 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ET-1815 waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

FAQ

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson ET-1815 – Waste Ink Counter Reset using Wic Reset Connect.

Корпа