Epson TX510FN Waste Ink Counter Reset

The Epson TX510FN delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson TX510FN tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson TX510FN Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson TX510FN waste counter reset in minutes.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Epson TX510FN Ink Pad Counter Reset – Quick Steps

1. 1. korak: Prepare a Windows PC + USB cable and connect Epson TX510FN directly. Keep Internet enabled for validation.
2. 2. korak: Start Wic Reset Connect in Administrator mode and wait until Epson TX510FN appears in the device list.
3. 3. korak: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson TX510FN.

Most Epson TX510FN waste counter resets finish in ~1–2 minutes.

What You Need

• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)

Common Fixes

• Close Epson Status Monitor or other printer utilities.
• Use a direct USB connection (avoid hubs).
• Restart printer and PC, then try again.
• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).

FAQ