How to Reset Epson L3111 Waste Ink Counter

Epson L3111 Waste Ink Counter Reset

The Epson L3111 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3111 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L3111 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson L3111 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Epson L3111 Ink Pad Counter Reset – Quick Steps

1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson L3111 via USB (Wi-Fi reset is not supported).
2. korak: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L3111.
3. korak: Paste the reset key, click Reset, and after completion power-cycle Epson L3111.

Buy Reset Key ⬇️ Download Wic Reset Connect Navodila

Most Epson L3111 waste counter resets finish in ~1–2 minutes.

Common Fixes

Use a direct USB connection (avoid hubs).
Restart printer and PC, then try again.
Temporarily disable VPN/proxy if validation fails.
Run the app as Administrator.
Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L3111 – Waste Ink Counter Reset using Wic Reset Connect.