Epson L101 Ink Pad Counter Reset Guide

Epson L101 Waste Ink Counter Reset

The Epson L101 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L101 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson L101 Ink Pad Counter Warning?

Most Epson L101 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson L101 Waste Ink Counter in 3 Steps

  1. 1. korak: Connect Epson L101 to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. korak: Run Wic Reset Connect as Administrator and confirm Epson L101 is detected.
  3. 3. korak: Paste the reset key, click Reset, and after completion power-cycle Epson L101.
Buy Reset Key ⬇️ Download Wic Reset Connect Navodila

Most Epson L101 waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L101 – Waste Ink Counter Reset using Wic Reset Connect.

Nakupovalna košarica