Reset Epson K201 Waste Ink Counter in Minutes

Epson K201 Waste Ink Counter Reset

When the Epson K201 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson K201 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson K201 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson K201 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson K201 Printing

  1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson K201 via USB (Wi-Fi reset is not supported).
  2. 2. korak: Run Wic Reset Connect as Administrator and confirm Epson K201 is detected.
  3. 3. korak: Paste the reset key, click Reset, and after completion power-cycle Epson K201.
Buy Reset Key ⬇️ Download Wic Reset Connect Navodila

Most Epson K201 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Run the app as Administrator.
  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson K201 – Waste Ink Counter Reset using Wic Reset Connect.

Nakupovalna košarica