Epson EP-780A Waste Ink Counter Reset

When the Epson EP-780A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson EP-780A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson EP-780A Waste Ink Counter

With Wic Reset Connect, you can reset the Epson EP-780A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson EP-780A Waste Counter Reset

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson EP-780A via USB (Wi-Fi reset is not supported).
2. 2. korak: Run Wic Reset Connect as Administrator and confirm Epson EP-780A is detected.
3. 3. korak: Paste the reset key, click Reset, and after completion power-cycle Epson EP-780A.

Most Epson EP-780A waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key