Epson XP-615 Ink Pad Counter Reset Guide

Epson XP-615 Waste Ink Counter Reset

The Epson XP-615 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson XP-615 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-615 Stops Printing (Waste Counter Limit)

Most Epson XP-615 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson XP-615 Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-615 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-615.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson XP-615 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-615 waste counter resets finish in ~1–2 minutes.

System Requirements

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

FAQ

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson XP-615 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart