Reset Epson SX410 Waste Ink Counter in Minutes

Epson SX410 Waste Ink Counter Reset

If your Epson SX410 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson SX410 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson SX410 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson SX410 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson SX410 Waste Counter Reset

  1. Step 1: Connect Epson SX410 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson SX410 is detected.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson SX410.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson SX410 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Try another USB cable (some cables are charge-only).
  • Use a direct USB connection (avoid hubs).
  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson SX410 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart