Epson ME-620F Waste Ink Counter Reset

Epson ME-620F Waste Ink Counter Reset

If your Epson ME-620F suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-620F uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ME-620F Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ME-620F waste counter reset in minutes.

Epson ME-620F Ink Pad Counter Reset – Quick Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson ME-620F directly. Keep Internet enabled for validation.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ME-620F.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ME-620F.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ME-620F waste counter resets finish in ~1–2 minutes.

System Requirements

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson ME-620F – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart