Epson BX630FW Waste Ink Counter Reset

When the Epson BX630FW reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson BX630FW accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson BX630FW Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson BX630FW waste counter reset in minutes.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Step-by-Step: Epson BX630FW Waste Counter Reset

1. Step 1: Prepare a Windows PC + USB cable and connect Epson BX630FW directly. Keep Internet enabled for validation.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson BX630FW.
3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson BX630FW to finalize.

Most Epson BX630FW waste counter resets finish in ~1–2 minutes.

What You Need

• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key

Troubleshooting

• Temporarily disable VPN/proxy if validation fails.
• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.

Frequently Asked Questions