Reset Epson WF-2011 Waste Ink Counter in Minutes

Epson WF-2011 Waste Ink Counter Reset

If your Epson WF-2011 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson WF-2011 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson WF-2011 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson WF-2011 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson WF-2011 Ink Pad Counter Reset – Quick Steps

Step 1: Connect Epson WF-2011 to a Windows computer with a stable Internet connection using a USB cable.
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2011.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson WF-2011.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson WF-2011 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson WF-2011 – Waste Ink Counter Reset using Wic Reset Connect.