Reset Epson L3269 Waste Ink Counter in Minutes

Epson L3269 Waste Ink Counter Reset

When the Epson L3269 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson L3269 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson L3269 Waste Ink Counter

Most Epson L3269 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Reset Epson L3269 Waste Ink Counter in 3 Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3269 via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L3269.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L3269.

Buy Reset Key ⬇️ Download Wic Reset Connect 使用方法

Most Epson L3269 waste counter resets finish in ~1–2 minutes.

Troubleshooting

Use a direct USB connection (avoid hubs).
Temporarily disable VPN/proxy if validation fails.
Close Epson Status Monitor or other printer utilities.
Restart printer and PC, then try again.
Run the app as Administrator.

Frequently Asked Questions

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L3269 – Waste Ink Counter Reset using Wic Reset Connect.