Epson L3219 Waste Ink Counter Reset
The Epson L3219 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
A waste ink counter in the Epson L3219 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Understanding the Epson L3219 Waste Ink Counter
With Wic Reset Connect, you can reset the Epson L3219 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Typical Signs
- ‘Service Required’ / service life message in driver or utility
- Maintenance/support code (varies by model/driver)
- Printing stops after cleaning cycles
- Warning repeats after restarting the printer
Three Steps to Restore Epson L3219 Printing
- Step 1: Prepare a Windows PC + USB cable and connect Epson L3219 directly. Keep Internet enabled for validation.
- Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L3219.
- Step 3: Use the key to reset the counter, wait for completion, then restart Epson L3219 to finalize.
Most Epson L3219 waste counter resets finish in ~1–2 minutes.
What You Need
- Stable Internet connection during reset
- Valid Wic Reset Connect reset key
- USB connection required (Wi-Fi reset not supported)
- Windows 7/8/10/11 PC
If the Printer Is Not Detected
- Try another USB cable (some cables are charge-only).
- Temporarily disable VPN/proxy if validation fails.
- Close Epson Status Monitor or other printer utilities.
- Run the app as Administrator.
- Restart printer and PC, then try again.
FAQ
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Guide prepared for Epson L3219 – Waste Ink Counter Reset using Wic Reset Connect.