Reset Epson XP-207 Waste Ink Counter in Minutes

Epson XP-207 Waste Ink Counter Reset

When the Epson XP-207 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson XP-207 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-207 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson XP-207 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson XP-207 Printing

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-207 via USB (Wi-Fi reset is not supported).
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-207 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-207.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-207 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson XP-207 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart