Epson WF-2750 Waste Ink Counter Reset

The Epson WF-2750 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson WF-2750 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson WF-2750 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson WF-2750 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson WF-2750 Waste Counter Reset

1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2750 via USB (Wi-Fi reset is not supported).
2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson WF-2750 appears in the device list.
3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson WF-2750.

Most Epson WF-2750 waste counter resets finish in ~1–2 minutes.

What You Need

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset

Troubleshooting

• Run the app as Administrator.
• Close Epson Status Monitor or other printer utilities.
• Use a direct USB connection (avoid hubs).
• Try another USB cable (some cables are charge-only).
• Restart printer and PC, then try again.