Epson WF-2655 Ink Pad Counter Reset Guide

Epson WF-2655 Waste Ink Counter Reset

The Epson WF-2655 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson WF-2655 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson WF-2655 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson WF-2655 waste counter reset in minutes.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson WF-2655 Waste Ink Counter in 3 Steps

  1. Step 1: Connect Epson WF-2655 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson WF-2655 is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson WF-2655 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson WF-2655 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson WF-2655 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart