Epson PX800FW Waste Ink Counter Reset

Epson PX800FW Waste Ink Counter Reset

The Epson PX800FW delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson PX800FW accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson PX800FW Waste Ink Counter

With Wic Reset Connect, you can reset the Epson PX800FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson PX800FW Waste Counter Reset

  1. Step 1: Connect Epson PX800FW to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson PX800FW.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson PX800FW.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson PX800FW waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson PX800FW – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart