Epson NX300 Ink Pad Counter Reset Guide

Epson NX300 Waste Ink Counter Reset

The Epson NX300 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson NX300 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson NX300 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson NX300 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Epson NX300 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson NX300 via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson NX300 is detected.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX300.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson NX300 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson NX300 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart