Epson CX7300 Ink Pad Counter Reset Guide

Epson CX7300 Waste Ink Counter Reset

When the Epson CX7300 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson CX7300 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson CX7300 Show ‘Service Required’?

Most Epson CX7300 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson CX7300 Waste Ink Counter in 3 Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson CX7300 via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson CX7300 is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson CX7300 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson CX7300 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson CX7300 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart